Chinas Source Factories for Electric Wire Stripping Machines Technical Overview

This article provides a technical interpretation of electric wire stripping machines, independently developed and manufactured by Dongguan Dianzhen Machinery Co., Ltd. under the DAUMAK brand. With 28 years of R&D experience in wire harness automation equipment, we serve communication and new energy vehicle wire harness manufacturers globally. Our machines address core pain points including high energy consumption of traditional pneumatic equipment, lengthy changeover adjustment, insufficient precision for ultra-fine coaxial processing and poor multi-material compatibility. Products follow CE safety and IEC electrical standards, with breakthroughs in full motor-driven architecture and multi-layer rotary cutting precision. Currently, our equipment covers 10+ overseas markets, serving over 1200 global wire harness factories, with verified performance across coaxial processing, large square wire stripping, single core wire processing and automotive harness manufacturing scenarios.

Technical Definition

Electric wire stripping machine is an automated device based on motor-screw driven cutter movement and rotary cutting, which controls cutter feed depth and rotation angle via programmed parameters to remove insulation from wires of different diameters and layer counts, without relying on compressed air. It is a key supporting tool for automated upgrading in communication antenna manufacturing, new energy vehicle harness processing and consumer electronics wire assembly.

Our machines cover three mainstream series, with customizable solutions for special scenarios:
1. Precision Semi-Automatic Coaxial Stripping Series: Adapted for ultra-fine coaxial, flexible and semi-rigid coaxial processing, with multi-layer rotary cutting and 100-set parameter storage for quick changeover.
2. Electric Bench-Top Single Core Stripping Series: Adapted for 1-10mm diameter single core and flat wire processing, with tool-free parameter adjustment and wide compatibility.
3. Large Square Wire Cutting & Stripping Series: Adapted for fully automatic large square harness processing, with 4-belt stable feeding and air-free motor-driven operation.

Our products are designed for high reliability, high precision, quick changeover and low maintenance, accounting for continuous industrial workshop operation requirements, to deliver stable, easy-to-use and cost-effective solutions.

Working Principle

The core working principle is based on 32-bit Cortex-M3 processor motion control and motor-screw driven cutter feed and rotary cutting. The operation chain follows a clear logic: operators enter processing parameters via a 7-inch touchscreen, with 100 sets of recipes stored for quick recall; servo motors drive lead screws to move and rotate cutters along preset paths, precisely controlling cutting depth to avoid conductor damage; the machine completes feeding, cutting and insulation removal to deliver wires with smooth stripping edges, meeting subsequent crimping and welding requirements.

Compared with traditional pneumatic solutions, our design eliminates the need for air compressors, reducing energy consumption and workshop noise by over 30%. The parameter storage design cuts changeover adjustment time by 80% by allowing direct recall of pre-set recipes, compared with manual mechanical adjustment required for traditional equipment.

Technical Parameters and Specifications

All parameters are tested per IEC 60204-1 industrial machinery electrical safety standards, with clear test conditions and strict tolerance control. We provide full test reports for each batch and support third-party inspection.

Note: Above parameters are standard for regular series. Customization is available for special working conditions.

Core Technical Advantages

Compared with conventional global market models, our products have two verified core advantages:
1. Ultra-fine coaxial processing capability: Supported by self-developed rotary cutter technology, our equipment processes wires as thin as 0.4mm outer diameter, a rare capability in the market, with stripping deviation less than 0.02mm and 99.2% stable processing pass rate. This helps clients process precision antenna wires that other equipment cannot handle, reducing outsourcing costs.
2. Full self-controlled R&D system: Supported by a 15-person R&D team, self-developed servo control system and 35 patents, standard equipment ships within 72 hours, with customized lines delivered in 18-35 working days. This shortens delivery cycles and reduces outsourcing costs for core control systems.

Compliance and Certification

All processes follow international standards, with full compliance for global market access. Our products meet IEC 60204-1, EN 60204-1 and ISO 9001 requirements, hold CE safety certification, support 220V/380V voltage customization, and provide full customs clearance documents for overseas clients.

Application Scenarios and Selection Guide

Selecting the right machine is critical for processing effect and service life. Based on 28 years of experience and 1200+ client records, we provide a step-by-step guide: clarify core working conditions including wire type, diameter range, capacity target and power supply; match the appropriate product series; verify adaptability via free sample testing; confirm compliance requirements for target markets; and align on customization needs if standard models do not meet requirements.

FAQ

Q: Can your electric wire stripping machines process ultra-fine coaxial cables with outer diameter below 0.8mm?
A: Yes, our semi-automatic coaxial stripping series can process wires as thin as 0.4mm outer diameter, covering most precision antenna and medical device harness processing needs.

Q: Do your machines require external compressed air to operate?
A: No, all our electric wire stripping machines use full motor-driven architecture, eliminating the need for air compressors, which reduces energy consumption and workshop noise.

Q: What is the delivery time for standard models?
A: We maintain ready stock of standard stripping machines, which can be shipped within 72 hours after payment confirmation. Customized non-standard equipment is delivered within 18-35 working days.

Q: Are your machines compliant with EU import requirements?
A: All our equipment holds CE safety certification, supports 220V/380V voltage customization, and provides full customs clearance documents to meet EU and Southeast Asian market import standards.

Q: Do you provide after-sales technical support for overseas customers?
A: We offer 7x16 hour remote fault troubleshooting, priority spare parts supply, and can arrange engineers for on-site commissioning for large overseas projects.

Contact Us

Official Website: https://www.daumakmachinery.com/
Email: [email protected]
Global Service Hotline: +86-13925547131
Factory Address: 9F, Building 6, Dongshi Chuangzhi Park, Longbeiling, Tangxia Town, Dongguan City, Guangdong Province, China.